Chargers for portable devices typically need electrical voltage, which means they must be equipped with protection that fully safeguards rechargeable batteries from overheating and burnout and does not make repair of Canon cameras or other manufacturers a common task for the user. Also, proper protection of the charger's housing itself is necessary.
It should not be forgotten that a charger is supplied and designed for a specific type of battery. For example, for a mobile device, picking a charger is much simpler. All that needs to be done is to find a charger that is compatible with the model. This is done directly at a mobile device store, where qualified specialists can select all necessary components.
Difficulties of choice
With cameras, the consumer always has a harder time, because for more complex devices, chargers may differ not only by brand but also in internal configuration. For this reason, it is better not to try to charge the battery with a device not intended for it, as it may well be incompatible with the type of battery in the camera, and you will be guaranteed an unplanned repair of Sony cameras. The consequences can be varied: from a simple "failure to charge" and a camera error message, to the device becoming inoperable.
Types of chargers
Let us consider the existing types of chargers. According to operating principles, all chargers are divided into two types. The most common are constant current chargers, and somewhat less common are constant voltage chargers.
As can be understood, constant current supply occurs at varying voltage. Using such a charger, battery charging stops as soon as the voltage parameters do not reach the desired level. Devices of this type are usually used to charge nickel-cadmium (Ni-Cd) and some nickel-metal hydride (Ni-MH) batteries. The downside is that charging leads to an increase in battery temperature, boiling of the electrolyte, and a decrease in its energy capacity; among the consequences, destruction of the device's components can also be mentioned.
Therefore, it is mandatory to monitor the charging process of the camera. For this purpose, special developments can be used. For example, the output voltage or temperature indicators of the battery elements can be measured and constantly monitored. Nickel-based batteries, although still in use, are no longer manufactured by producers.
_