An information and analytics digest for everyone going abroad or staying home
Auto tour

Car Care: A Small Stone and a Big Trouble

Car enthusiasts are interested in such technical innovations, and the debate 'anti-gravel or mastic' has not subsided yet. However, the methods of using products such as anti-gravel and mastics are described quite clearly – as are their areas of application.

How is this useful for a car enthusiast? Everyone wants to protect their car. If there is an 'extra' stone on the road that damages the paintwork, after some time in our rainy and rather cold climate problems are unavoidable. Chips and scratches are also hidden not only in the underbody area, which the owner does not inspect every day. They can also appear on the hood, in visible places, or on the contrary, on the lower part of doors or under the bumper.

To ensure the car withstands the test not only of off-road conditions but also of the most ordinary road, it is better to use anti-gravel. Compositions with anti-shock properties have been known for quite some time and are very actively used by car manufacturers.

The coating will also be protected by special bitumen mastic: this is good prevention for potentially corrosive areas, and at the same time protection against significant damage that contributes to the 'growth' of rust in places of paintwork chips.

Anti-gravel and mastic – the main helpers of a car enthusiast

Products used for vehicles differ not only by brand. The composition and specifics of each product are also important. Applied in a timely manner and according to all rules (for example, thorough pressure washing, drying, degreasing the surface – and only then applying the special compound), these products can change your perception of the frequency of repairs.

Repainting the car will in any case cost much more than applying mastic and anti-gravel once more. And applying them is easier than it might seem. For example, the anti-gravel 'preparation' just needs to be sprayed twice with a special gun. The time between layers is only a few minutes. Note: some products are initially developed by manufacturers for covering partially rusted surfaces.

_